济南大型广告牌制作标准及施工要求

页面更新时间:2015-06-19 09:39 来源:未知 作者:admin 点击:

济南大型广告牌一般是树立在高速公路两侧的有一根立柱支撑的大型广告牌,通常的制作标准是总高18米,板面18MX6M两面或三面的,及7m×21m的牌面尺寸,在设计牌面尺寸应考虑地方市容管理和当地的风荷载等方面的规定。现在标准焊接式单立柱广告牌是由省级设计院设计图纸,精良的队伍施工,确保质量第一,安全第一的原则施工。济南大型广告牌 http://www.xiongdiguanggao.com/ 施工安全要求:

Jinan large billboards is generally on both sides of the highway to establish the supporting pillars of a large billboards, the usual standards of production is a total of 18 meters high, surface 18MX6M two or three surfaces, and 7m * 21m card size, in the dimensions of brand design should consider local appearance management and when the wind load provisions. Now standard welding single column advertising is by the Provincial Design Institute design drawings, excellent team construction, to ensure the quality of the first, safety first principle of construction. Construction safety requirements of Ji'nan large advertising brand:

1、立柱吊装

1, column lifting

立柱吊装时应注意落吊对丝准确,确保不咬丝。落吊到位,闭丝、紧丝应均匀进行,确保紧丝到位。再闭紧第二颗丝母。

When the column is lifted, should pay attention to the wire is accurate, make sure not to bite. Drop hanging in place, close the wire, tight wire should be uniform, to ensure that the tight wire in place. And then close the second wire mother.

2、牌面钢结构吊装

2, brand surface steel structure hoisting

牌面钢结构吊装时应注意吊点牢固,均匀平行上升。上升到一定高度均匀落吊至立柱连接稍上端由地面人员配合对准连接点准确落吊。

When the deck steel structure is lifted, it should be noted that the lifting point is firm and the uniform parallel rise. Rise to a certain height of the suspension to the upper part of the connecting point of the upper end of the connecting point of the upper end of the connecting point is accurate.